A well-made amplifier manufactured by RM in Italy.
This device is known by many nick-names, burner, amp, linear, boots, kicker etc. It increases the standard output of a CB or 10 Metre amateur radio from 4 Watts to 100 Watts max which makes a massive difference in transmitted range. Please note, it is not legal to use with a CB in the UK. We sell these on the understanding that they are used only by licensed ham operators or when using your CB outside the UK.
The maximum input is 5 Watts, and the SWR of your aerial needs to be good before using this product. Failing to follow this information may damage the output transistor which is not covered by any warranty.
The amp only increases outgoing signals, so to get the best out of it, the people you talk to should have a similar device.
You will also need a short Co-Ax patch lead to connect it to your rig.
• Electronic switch - Inversion polarity protection
Frequency 25-30 MHz (Europe)
Supply voltage 12-14 Vcc
Input current 8-11 A
Input power 1-5 W
Input power SSB 2-10 W
Output power 100 W MAX
output power SSB 200 W pep MAX
Fuse 12 A
Output power level 1
Size 109x125x35 mm
Weight 305 gr.